WHATSAPP HELP CHAT
FREE SHIPPING WORLDWIDE|SECURE PAYMENT

Vertical or horizontal lines, date at 3 or at 6: what a real Aqua Terra shows

Omega Seamaster Aqua Terra fake vs real is mostly a matching test: does every detail belong to the same reference? Since 2008 Omega has made the Aqua Terra in two main families. The 231 references have vertical lines on the dial and, on the three-hand models, the date at 3. The 220 references that replaced them in 2017 have horizontal lines and the date at 6. A fake Omega Aqua Terra usually looks right at arm’s length. The mistakes show when the number, the dial and the back come from different years. Below are seven checks, each with photos of our own watches, and a note on what a photo cannot prove.

What separates the 231 and 220 Aqua Terra?

The Aqua Terra is the Seamaster without a diving bezel: a smooth polished bezel, a time-and-date dial and 150m / 500ft printed under the centre. Before 2008 its references had four digits, such as 2503.80. Every Aqua Terra we list follows a later reference, and the first three digits tell you which family it claims.

Detail 231 references, 2008 to 2016 220 references, from 2017
Lines on the dial Vertical Horizontal
Date window on three-hand models At 3 At 6
Dial line under the centre Co-Axial Chronometer; Master Co-Axial Chronometer on some later models Co-Axial Master Chronometer
Size code in the reference 39 for 38.5mm, 42 for 41.5mm 38 for 38mm, 41 for 41mm
Omega movement Cal. 8500 family; 8508 in the 15000 Gauss model Cal. 8900 in the 41mm, 8800 in the 38mm

Read a reference from left to right. 220.10.41.21.03.001 is a 220-family watch with the 41mm case code and dial colour 03. In the references we list, the colour codes are 01 for black, 02 for white or silver, 03 for blue, 06 for grey and 10 for green. Some models break the pattern on purpose: the GMT of the 231 family, 231.13.43.22.01.001, has its date at 6, and some dials carry a wave or dimpled pattern instead of lines. Whatever the model, the number, the dial and the back must agree with one another.

Omega Aqua Terra fake vs real: 7 checks

The table sums up each check. The notes below explain what to look for and how our watches compare with Omega’s.

What to check Real Omega Our watches How to check
1. Lines and date against the number 231: vertical lines, date at 3. 220: horizontal lines, date at 6 Follow their family on most listings; two 220 listings show the 231 layout Straight-on dial photo
2. Dial text Wording of its family and edition Matches the layout shown on each dial we checked Dial close-up
3. The lines themselves Physical lines in the dial, evenly spaced Raised lines that catch the light at an angle Angled dial photo
4. Case and crown Smooth polished bezel, no crown guards Same shape; brushed flanks under a polished bezel Photos of both sides
5. Caseback Display back, ring text and calibre of the reference Display back with ring text; rotor printed with an Omega calibre number Caseback photo
6. Beat rate 25,200 vibrations per hour on Cal. 8500 and 8900 28800 on the timing machine photo of our blue 220 Timegrapher reading
7. Bracelet and clasp Omega mark engraved on the clasp cover Engraved Ω symbol, with OMEGA on the 220 bracelets Clasp photo

1. Do the lines and the date agree with the number?

This check catches most mixed watches. A 231 number on a dial with horizontal lines, or a 220 number with the date at 3, means the parts come from two families, and Omega never built a watch that way. Apply it to the listing title as well. Two of our own listings carry 2017 numbers, the blue 41mm with vertical lines and the 38mm white 220.10.38.20.02.001, yet their photos show the earlier layout: vertical lines, the date at 3 and Master Co-Axial Chronometer on the dial. You receive the watch in the photos, so judge by them.

Black Aqua Terra 231.10.39.21.01.002 dial with vertical lines, date at 3 and Master Co-Axial Chronometer 150m / 500ft
231 family: vertical lines, the date at 3 and Master Co-Axial Chronometer on the black 38.5mm 231.10.39.21.01.002.
Green Aqua Terra 220.10.41.21.10.001 dial with horizontal teak lines, date at 6 and Co-Axial Master Chronometer
220 family: horizontal lines, the date at 6 and Co-Axial Master Chronometer on the green 220.10.41.21.10.001.

2. The dial text

Omega changed the wording with the movement. The early 231 dials read Co-Axial Chronometer, some later 231 models read Master Co-Axial Chronometer, and from 2017 the 220 dials read Co-Axial Master Chronometer. The last two use the same words in a different order, which is easy to miss on a small photo. Editions add a line of their own: >15’000 Gauss in yellow on the 15000 Gauss 231.10.42.21.01.002, and >15’007 Gauss on the Spectre. On a close-up, every letter of Seamaster, the dial line and 150m / 500ft should be sharp, evenly spaced and centred under the logo.

Aqua Terra 15000 Gauss 231.10.42.21.01.002 black dial with yellow 15’000 Gauss line, yellow seconds hand, date at 3
The 15000 Gauss dial: Co-Axial Chronometer with the >15’000 Gauss line in yellow, vertical lines and the date at 3.

3. The lines themselves

Omega calls the pattern teak, after the planks of a boat deck. On Omega’s dials the lines are part of the dial surface, not print. On an angled photo they should catch the light and throw thin shadows, as they do on our green dial above; printed lines stay flat from every angle. Follow two or three lines across the dial: the gaps between them should stay equal all the way to the minute track.

4. The case and the crown

An Aqua Terra case has no crown guards and a smooth polished bezel with no scale. Look at the photos of both sides: a shoulder of metal around the crown, or a bezel with numbers, does not belong to any Aqua Terra. For the size, read the case code in the reference and compare it with our Omega watch size guide. Omega’s product sheet for 231.10.42.21.01.002 gives 41.5mm, even where one of our listing names rounds a 231.10.42 case to 42mm.

5. The caseback: ring text and rotor

Every Aqua Terra we list has a display back, and the ring around the glass carries the text of its family. On our 220 references it reads Aqua Terra and 150m / 500ft. On the antimagnetic 231 models it reads Anti-Magnetic and >15’000 Gauss. The rotor is printed with an Omega calibre number: Master Co-Axial 8900 on the 2017 models, Co-Axial 8500 or Master Co-Axial 8500 on the 231 ones we photographed. That print sits on a clone movement. It tells you which reference the watch follows, not what is inside, and it can be one more mixed detail: Omega’s product sheet for 231.10.42.21.01.002 names calibre 8508, while the rotor of our 15000 Gauss version reads 8500. Our guide to Omega clone movements explains how to read a movement through the back.

Display back of the green Aqua Terra 220.10.41.21.10.001, rotor printed Omega Master Co-Axial 8900, Aqua Terra on the ring
Caseback of a 220-family watch: Aqua Terra and 150m / 500ft on the ring, Master Co-Axial 8900 printed on the rotor.

6. The beat rate on a timing machine

Omega’s calibres 8500 and 8900 run at 25,200 vibrations per hour. The timing machine photo of our blue 220.10.41.21.03.001 shows 28800 in the beat column, next to +2 seconds a day and an amplitude of 288°. No print on a rotor changes that number, which makes a timegrapher reading the clearest single difference between the two. You can ask for this reading with the QC photos of your own watch.

Blue Aqua Terra 220.10.41.21.03.001 on a timing machine reading +2 s/d, 288 degrees amplitude, 28800 beats
Our blue Aqua Terra on a timegrapher during inspection: +2 s/d, 288° amplitude, 28800 in the beat column.

7. Bracelet and clasp

The clasp cover should carry Omega’s mark, engraved, sharp and centred. On our 220 bracelets it reads OMEGA under the Ω symbol, as on the green 220.10.41.21.10.001 below; several of our 231-style bracelets show the symbol alone. Weight, the magnet test and the serial number apply to every Omega, and our guide on how to spot a fake Omega covers them, so they are not repeated here.

Aqua Terra bracelet on a display cushion, clasp cover engraved with the Omega symbol and OMEGA, polished centre links
Clasp cover of the green 220.10.41.21.10.001: the Ω symbol and OMEGA engraved in the centre.

Special editions: what each one must show

Editions are easy to check, because each has details no standard Aqua Terra carries. If one of them is missing, or turns up on a watch of the wrong family, the parts are mixed.

Aqua Terra Spectre 231.10.42.21.03.004 with a blue patterned dial, yellow seconds hand and the 15’007 Gauss line
The Spectre edition: patterned blue dial, yellow accents and >15’007 Gauss under Master Co-Axial Chronometer.
Aqua Terra GMT 231.13.43.22.01.001 with a black dial and red GMT hand on a silver tone bracelet

How to spot a fake Omega Seamaster Aqua Terra on QC photos

Before your watch ships, you see photos and a video of that exact piece. These are the frames worth asking for, in this order:

  1. The dial straight on, in daylight: lines, date position and dial text against the family table above.
  2. The dial at an angle: the lines should catch the light.
  3. Both sides of the case: no crown guards, no scale on the bezel.
  4. The caseback: the text on the ring and the print on the rotor.
  5. The clasp cover: engraving centred and sharp.
  6. The timing machine: rate, amplitude and beat.

Some things no photo proves. The 15000 Gauss text on a dial or a caseback ring is print and engraving, and we make no claim that our watches resist 15,000 gauss. Water use is covered in our water resistance guide and in the answer about swimming below.

Which family does each of our Aqua Terras follow?

This is how our listings line up with the two families, going by what the photos show. All of them are in the Seamaster collection.

What the photos show Our watches
220: horizontal lines, date at 6 black 220.10.41.21.01.001, blue 220.10.41.21.03.001, dark blue 220.10.41.21.03.004, grey with blue hands 220.10.41.21.06.001, green 220.10.41.21.10.001, white with orange 220.10.41.21.02.001, white on blue rubber 220.12.41.21.03.009
220: gradient dial without lines, date at 6 turquoise 220.10.41.21.03.006
220 Worldtimer, 43mm, date at 6 blue on rubber, green with a dark green bezel ring
231: vertical lines, date at 3 black 38.5mm 231.10.39.21.01.002, white with blue hands 231.10.42.21.02.002, white with rose gold tone hands 231.10.42.22.02.001, black with green 231.10.42.21.01.004, 15000 Gauss 231.10.42.21.01.002
231: wave dial, date at 3 blue with gold tone hands 231.10.42.21.03.006, navy with rose gold tone hands 231.10.42.21.01.006, silver 231.10.42.21.02.006
231 editions Spectre; golf dimpled dial; GMT with the date at 6
220 number in the name, 231 layout on the photos blue 41mm with vertical lines and the date at 3; white 38mm with the date at 3

FAQ: Aqua Terra fake vs real

Is an Aqua Terra with vertical lines and a 220 reference real?

Omega’s 220 dials have horizontal lines and the date at 6, so this combination points to mixed parts or a wrong number in the listing. Judge the watch by its photos. Two of our listings show exactly this, and the table above sorts them by what the photos show.

Does 15000 Gauss on the dial mean the watch resists magnetism?

On Omega’s watch it names the magnetic field the movement is built to resist. On ours it is print on the dial and engraving on the caseback ring, and we make no claim about magnetic resistance.

Which movement is inside your Aqua Terra?

A clone automatic movement under a rotor printed with an Omega calibre number. Our movement guide names the DD8900 for the 41mm Aqua Terra and the DD8800 for the 38mm. Before your watch ships, ask the team which movement it has and for a timing machine reading.

Can I swim with the Aqua Terra clone?

Yes. Like every watch in our shop, the Aqua Terra can go swimming, in the shower and diving. Keep the screw-down crown closed while it is in the water.

How is this different from checking a Seamaster Diver 300M?

The Diver 300M has a rotating ceramic bezel, a wave dial and a helium valve, and our Seamaster replica vs original guide covers those. The Aqua Terra has none of the three, so the checks move to the lines, the date position and the caseback text.

The short version

Read the reference first, then the dial. Vertical lines and the date at 3 go with a 231 number, horizontal lines and the date at 6 with a 220 number, and the dial text and the caseback ring must belong to the same family. After that, a timing machine reading shows the beat rate, which no print can change. The Planet Ocean is checked the same way, generation by generation, in our Planet Ocean fake vs real guide. Every Aqua Terra we list is in the Seamaster collection.